Brayers have a way of ending up exactly where you don't want them. Rolling off the table, sitting in a drawer, or resting roller-down on your bench between prints. This holder keeps them off your work surface, visible, and easy to grab when you need them.
It cradles your brayer by the handle with the roller suspended in the air. Set down an inked brayer between pulls without worrying about it rolling away or leaving marks on clean paper. Handy during cleanup too, when you need both hands free.
Screw mount — installs directly to any wall or vertical surface. Works with Command strips too if you'd rather not drill.
IKEA SKADIS pegboard — slide the tabs in and you're done.
Standard pegboard — fits standard 1" x 1" hole spacing, hooks on like any other pegboard accessory.
Ships fully assembled
Dimensions: 1.75" tall x 1.6" wide x 0.6" deep from wall
Default color: white. Want something different? Send me a message before ordering and I'll let you know what's currently in stock. No extra charge for color.
Brayer not included
Flat rate shipping is $6 regardless of how many you order, so it makes sense to grab what you need up front. Most printmakers have more than one brayer — different sizes for different blocks, or separate rollers for different ink colors.
Single Holder — $7
Studio Set (2 holders) — $13 (save $1)
Ink Set (3 holders) — $18 (save $3)
Full Studio Set (5 holders) — $28 (save $7)
Processing time is up to 10 business days before shipping, often less.
Designed around Speedball brand brayers and most standard soft rubber brayers with a similar handle shape. If you're not sure whether your brayer will fit, send me a message before ordering.
Screw mount: Mark your hole placement, drill pilot holes if needed, and screw it in. Or skip the drilling entirely and use a Command strip on the back.
SKADIS pegboard: Slide the mounting tabs into the board. That's it.
Standard pegboard: Hooks on like any standard pegboard accessory.
Different size, color, or mounting style — message me before ordering and we can work something out.
I designed this because my own brayers kept ending up in the wrong place at the wrong time. If it keeps your studio a little more organized, that's exactly what it's there for.
How many brayers does one holder support? One holder, one brayer. Pick the bundle that matches how many you use regularly.
Will this work with inked brayers between prints? Yes. The roller stays suspended off the surface. For long-term storage, clean your brayers first.
What if I don't have a pegboard? Choose the screw mount option. It works on any wall or vertical surface, with screws or Command strips.
How long until it ships? Up to 10 business days processing, often shorter. Shipping after that runs 3-5 business days depending on your location.
Brayers have a way of ending up exactly where you don't want them. Rolling off the table, sitting in a drawer, or resting roller-down on your bench between prints. This holder keeps them off your work surface, visible, and easy to grab when you need them.
It cradles your brayer by the handle with the roller suspended in the air. Set down an inked brayer between pulls without worrying about it rolling away or leaving marks on clean paper. Handy during cleanup too, when you need both hands free.
Screw mount — installs directly to any wall or vertical surface. Works with Command strips too if you'd rather not drill.
IKEA SKADIS pegboard — slide the tabs in and you're done.
Standard pegboard — fits standard 1" x 1" hole spacing, hooks on like any other pegboard accessory.
Ships fully assembled
Dimensions: 1.75" tall x 1.6" wide x 0.6" deep from wall
Default color: white. Want something different? Send me a message before ordering and I'll let you know what's currently in stock. No extra charge for color.
Brayer not included
Flat rate shipping is $6 regardless of how many you order, so it makes sense to grab what you need up front. Most printmakers have more than one brayer — different sizes for different blocks, or separate rollers for different ink colors.
Single Holder — $7
Studio Set (2 holders) — $13 (save $1)
Ink Set (3 holders) — $18 (save $3)
Full Studio Set (5 holders) — $28 (save $7)
Processing time is up to 10 business days before shipping, often less.
Designed around Speedball brand brayers and most standard soft rubber brayers with a similar handle shape. If you're not sure whether your brayer will fit, send me a message before ordering.
Screw mount: Mark your hole placement, drill pilot holes if needed, and screw it in. Or skip the drilling entirely and use a Command strip on the back.
SKADIS pegboard: Slide the mounting tabs into the board. That's it.
Standard pegboard: Hooks on like any standard pegboard accessory.
Different size, color, or mounting style — message me before ordering and we can work something out.
I designed this because my own brayers kept ending up in the wrong place at the wrong time. If it keeps your studio a little more organized, that's exactly what it's there for.
How many brayers does one holder support? One holder, one brayer. Pick the bundle that matches how many you use regularly.
Will this work with inked brayers between prints? Yes. The roller stays suspended off the surface. For long-term storage, clean your brayers first.
What if I don't have a pegboard? Choose the screw mount option. It works on any wall or vertical surface, with screws or Command strips.
How long until it ships? Up to 10 business days processing, often shorter. Shipping after that runs 3-5 business days depending on your location.
