Brayers take up bench space. They roll around, fall off tables, or end up in a drawer where they're hard to grab when you need them.
I wanted my brayers organized and easy to access, so I designed this wall-mounted holder. It keeps them off your work surface and visible when you need them. Also works great for setting down inky rollers between prints without the mess.
The holder cradles your brayer by the handle, keeping the roller suspended off your work surface. Set down an inked brayer between prints without worrying about it rolling away or touching clean paper. Perfect for cleanup too when you need both hands free.
Mounts to your wall, pegboard, or IKEA SKADIS system. Pegboard versions hook on instantly. Screw mount takes just a minute to install.
Single Holder: $7
Studio Set (2 holders): $13 (Save $1)
Ink Set (3 holders): $18 (Save $3)
Full Studio Set (5 holders): $28 (Save $7)
Flat rate shipping: $6 (same price whether you order one or five)
Processing time: Up to 10 business days before shipping
3D printed brayer holder in durable PLA plastic
Ships fully assembled, ready to install
Choice of three mounting options:
Screw mount (works with Command strips too)
IKEA SKADIS pegboard compatible
Standard pegboard (1" × 1" hole spacing)
Printed in white (other colors available, see below)
Dimensions:
1.75" tall × 1.6" wide × 0.6" deep from wall
Brayer not included
Designed around Speedball brand brayers and works with most standard soft rubber brayers with similar handle designs. If you have a different brand and aren't sure about fit, the screw mount version can be returned if it doesn't work for your setup.
Most printmakers own more than one brayer. Different sizes for different blocks, separate rollers for different ink colors, or extras for multi-color work.
Flat rate shipping means buying multiple holders costs the same as buying one. If you use three brayers regularly, grab the Ink Set and you're covered.
Default color: White
Other colors available: Color inventory changes, but if you want something other than white, leave a note at checkout and I'll let you know what's in stock. No extra charge for different colors.
Screw mount: Set the holder where you want it, mark the screw holes, drill pilot holes if needed, and screw it in. You can also use a Command strip on the back if you don't want to drill into your wall.
SKADIS pegboard: Slide the mounting tabs into the pegboard holes. That's it.
Standard pegboard: Hook it onto your pegboard like any other pegboard accessory. Fits standard 1" × 1" hole spacing.
Need a different size, color, or mounting style? Send me a message before ordering. I'm happy to work with you on custom variations.
Q: Will this fit my brayer?
A: Designed for Speedball brand brayers and most standard soft rubber brayers with similar handle designs. If you're unsure about compatibility with a different brand, the holder works best with brayers that have a similar handle shape to Speedball's.
Q: Can I mount this without drilling holes?
A: Yes. The screw mount version works with Command strips if you don't want to drill. Just stick the Command strip to the back and press it onto your wall.
Q: How many brayers can one holder support?
A: One holder holds one brayer. If you use multiple brayers, order the bundle set that matches how many you need.
Q: What if I don't have a pegboard?
A: Choose the screw mount option. It mounts directly to any wall or vertical surface.
Q: Does this work with inked brayers, or will ink drip off?
A: It holds the brayer by the handle with the roller suspended, so gravity pulls any excess ink downward. It's designed for setting down brayers between prints or during cleanup. For long-term storage, clean your brayers first.
Q: What colors are available?
A: White is always in stock. Other colors vary based on current filament inventory. Leave a note at checkout if you want a specific color and I'll confirm what's available. No upcharge for color.
Q: Can I get a custom size or mounting style?
A: Yes. Message me before ordering to discuss custom options.
Q: How long until it ships?
A: Processing time is up to 10 business days, often shorter. After that, shipping takes 3-5 business days depending on your location.
Brayers take up bench space. They roll around, fall off tables, or end up in a drawer where they're hard to grab when you need them.
I wanted my brayers organized and easy to access, so I designed this wall-mounted holder. It keeps them off your work surface and visible when you need them. Also works great for setting down inky rollers between prints without the mess.
The holder cradles your brayer by the handle, keeping the roller suspended off your work surface. Set down an inked brayer between prints without worrying about it rolling away or touching clean paper. Perfect for cleanup too when you need both hands free.
Mounts to your wall, pegboard, or IKEA SKADIS system. Pegboard versions hook on instantly. Screw mount takes just a minute to install.
Single Holder: $7
Studio Set (2 holders): $13 (Save $1)
Ink Set (3 holders): $18 (Save $3)
Full Studio Set (5 holders): $28 (Save $7)
Flat rate shipping: $6 (same price whether you order one or five)
Processing time: Up to 10 business days before shipping
3D printed brayer holder in durable PLA plastic
Ships fully assembled, ready to install
Choice of three mounting options:
Screw mount (works with Command strips too)
IKEA SKADIS pegboard compatible
Standard pegboard (1" × 1" hole spacing)
Printed in white (other colors available, see below)
Dimensions:
1.75" tall × 1.6" wide × 0.6" deep from wall
Brayer not included
Designed around Speedball brand brayers and works with most standard soft rubber brayers with similar handle designs. If you have a different brand and aren't sure about fit, the screw mount version can be returned if it doesn't work for your setup.
Most printmakers own more than one brayer. Different sizes for different blocks, separate rollers for different ink colors, or extras for multi-color work.
Flat rate shipping means buying multiple holders costs the same as buying one. If you use three brayers regularly, grab the Ink Set and you're covered.
Default color: White
Other colors available: Color inventory changes, but if you want something other than white, leave a note at checkout and I'll let you know what's in stock. No extra charge for different colors.
Screw mount: Set the holder where you want it, mark the screw holes, drill pilot holes if needed, and screw it in. You can also use a Command strip on the back if you don't want to drill into your wall.
SKADIS pegboard: Slide the mounting tabs into the pegboard holes. That's it.
Standard pegboard: Hook it onto your pegboard like any other pegboard accessory. Fits standard 1" × 1" hole spacing.
Need a different size, color, or mounting style? Send me a message before ordering. I'm happy to work with you on custom variations.
Q: Will this fit my brayer?
A: Designed for Speedball brand brayers and most standard soft rubber brayers with similar handle designs. If you're unsure about compatibility with a different brand, the holder works best with brayers that have a similar handle shape to Speedball's.
Q: Can I mount this without drilling holes?
A: Yes. The screw mount version works with Command strips if you don't want to drill. Just stick the Command strip to the back and press it onto your wall.
Q: How many brayers can one holder support?
A: One holder holds one brayer. If you use multiple brayers, order the bundle set that matches how many you need.
Q: What if I don't have a pegboard?
A: Choose the screw mount option. It mounts directly to any wall or vertical surface.
Q: Does this work with inked brayers, or will ink drip off?
A: It holds the brayer by the handle with the roller suspended, so gravity pulls any excess ink downward. It's designed for setting down brayers between prints or during cleanup. For long-term storage, clean your brayers first.
Q: What colors are available?
A: White is always in stock. Other colors vary based on current filament inventory. Leave a note at checkout if you want a specific color and I'll confirm what's available. No upcharge for color.
Q: Can I get a custom size or mounting style?
A: Yes. Message me before ordering to discuss custom options.
Q: How long until it ships?
A: Processing time is up to 10 business days, often shorter. After that, shipping takes 3-5 business days depending on your location.
