Capture that dust and also view your cuts easily on the Onefinity PRO CNC machine with 80mm Redline spindle.
This dust boot was originally designed for personal use, but due to numerous requests, the design files are now available for others. Please use the dust boot at your own risk. It has only been tested on my specific machine and setup, so you are responsible for proper installation and ensuring it operates safely in your own environment.
Included is an .STL & .STEP file of a my dust boot designed to fit the Woodworker PRO Onefinity CNC with an 80mm Redline spindle.
Designed to re-use the suckIt dust boot mounts and hardware. YOU MUST HAVE THIS HARDWARE TO USE THIS BOOT, or come up with your own mounting.
In addition to the suckIt hardware, You will need a few additional items.
(12) - 6mm diameter, 3mm thick neodymium magnets for the removable portion (amazon).
Easy Cut strip brushes. I use 1”, but 2” & 3” are available: https://www.mcmaster.com/catalog/131/1589/7900T1
M3 heat set inserts: https://www.mcmaster.com/catalog/131/3643/94459A769
You will receive a secure link to download the file.
The pictured holder is printed in PETG with 15% infill and 0.2mm layer height.
This is a DIGITAL FILE only, you will need to print our have printed.
For Personal use only. Please do not share or sell this model.
Capture that dust and also view your cuts easily on the Onefinity PRO CNC machine with 80mm Redline spindle.
This dust boot was originally designed for personal use, but due to numerous requests, the design files are now available for others. Please use the dust boot at your own risk. It has only been tested on my specific machine and setup, so you are responsible for proper installation and ensuring it operates safely in your own environment.
Included is an .STL & .STEP file of a my dust boot designed to fit the Woodworker PRO Onefinity CNC with an 80mm Redline spindle.
Designed to re-use the suckIt dust boot mounts and hardware. YOU MUST HAVE THIS HARDWARE TO USE THIS BOOT, or come up with your own mounting.
In addition to the suckIt hardware, You will need a few additional items.
(12) - 6mm diameter, 3mm thick neodymium magnets for the removable portion (amazon).
Easy Cut strip brushes. I use 1”, but 2” & 3” are available: https://www.mcmaster.com/catalog/131/1589/7900T1
M3 heat set inserts: https://www.mcmaster.com/catalog/131/3643/94459A769
You will receive a secure link to download the file.
The pictured holder is printed in PETG with 15% infill and 0.2mm layer height.
This is a DIGITAL FILE only, you will need to print our have printed.
For Personal use only. Please do not share or sell this model.
